Spare parts for Wybot A1

Keeping your Wybot A1 wireless robotic pool cleaner in perfect condition is key to guaranteeing that 120 minutes of autonomy and efficient cleaning of your pool. In this section you will find the complete catalog of genuine Wybot replacement parts designed specifically for the A1 model, ensuring full compatibility and factory performance.

From dual-layer filters to drive components, we have the parts you need to extend the life of your equipment.

Technical Catalog: Identify the Right Spare Part for the Wybot A1

The Wybot A1 is a rugged piece of equipment, but wear and tear from continuous use and exposure to chemicals necessitates periodic replacement of certain components. We have categorized the available spare parts by their technical function:

1. Filtration System (The key to cleanliness)

The Wybot A1 excels in its ability to retain fine dirt. To maintain this efficiency, it is vital to check the condition of the filters.

• Cotton foam filter (Ref. RWYM017): Essential for capturing the finest particles and preventing them from returning to the pool.
• 180 micron filter (Ref. RWYM018): The primary barrier for larger debris. If you notice cracks in the mesh, it is time to replace it so as not to strain the motor.

2. Traction and Mobility

If you notice that your robot "skids" or does not cover the entire surface of the pool (up to 100 m²), check these elements:

• Wheels (Ref. RWYM020 and RWYM004): Both small and large wheel kits are available. The wear on the rubber reduces the adherence on flat bottoms.
• Oscillating plate (Ref. RWYM012): Fundamental for the turns and changes of direction of the robot.
• Wheel support (Ref. RWYM019): Base structure for the bearing system.

3. Loading and Sealing

Being a wireless robot, the integrity of the charging components is critical to prevent water ingress.

• Original Charger (Ref. RWYM021): Always use the specific charger to protect the lithium battery.
• Charging Port Cover (Ref. RWYM010): Critical component. This cover ensures that the charging port is watertight. If the rubber is dry or cracked, replace it immediately to avoid serious damage due to water ingress.

Wybot A1 Frequent Spare Parts Comparison Chart

Below are the specifications of the most requested spare parts to make your choice easier:

(Technical data based on official manufacturer's references available in the catalog).

Professional Maintenance Tips for your Wybot A1

As pool robotics experts, we recommend you follow these guidelines to maximize the investment in your replacement parts:

• Charging Port Protection: Before connecting the charger (Ref. RWYM021), make sure the port is completely dry. Residual moisture can oxidize the contacts. Always check that the port cover (RWYM010) closes tightly before immersing the robot.
• Filter Cleaning: Do not wait until the filter is collapsed. Rinse both the 180 micron filter and the cotton foam after each cleaning cycle. This reduces pressure on the vacuum motor.
• Storage: If you will not be using the Wybot A1 during the winter, charge it at least once every 3 months (between 40% and 60%) to prevent the lithium battery from going into "deep sleep" and becoming irreversibly damaged.
• Wheel Check: Check that there are no tangled hairs or threads on the axles of the small or large wheels, as this slows down the robot and reduces battery life.