Spare parts filter Astralpool Star Plus

Original spare parts for filter Astralpool Star Plus

Original spare parts for the sand filter top sales Astralpool Star Plus: transparent cover D.220 with gasket, black cover D.220, screw cover neck ring, cover fixing ring, 2" fitting with O-ring, 2" male threaded terminal, 50 mm diffuser, complete pressure gauge and internal gaskets. Quimipool is an official distributor Astralpool. . Cross compatibilities with the range AstralpoolIce, Mulhacén, Victoria, Vesuvius, Volcano.

Related categories: swimming pool filter parts, , spare parts, , pool filters Astralpool, , spare parts selector valves, , pool filters.

The filter Astralpool Star Plus and its spare parts

The Astralpool Star Plus is one of the best-selling sand filters in the catalog Astralpool for residential pools: body of reinforced polyester with screw-on cover D.220 (transparent or black depending on version), 2" threaded connection for top selector valve and a design that has remained stable over the years, which facilitates the availability of spare parts.

The Star Plus range shares many parts with other filters Astralpool which use the same D.220 cap format with screws and 2" top connection: Ice, Mulhacén, Victoria, Vesuvius and Volcano. This multiplies the availability of spare parts and reduces the risk of running out of parts in the middle of the season.

Most requested parts and compatibilities

All parts are originals Astralpool. Cross compatibility with the range Astralpool is an important advantage: what works for the Star Plus usually also works for Ice, Mulhacén and Victoria in the common parts.

Cover parts

Hydraulic connection parts

Internal parts

Note on diameter: star Plus are available in various nominal diameters (Ø 400, Ø 500, Ø 600, Ø 750 depending on the version). The transparent cover D.220 and the neck ring D.220 refer to the diameter of the upper mouth of the filter, not the diameter of the body. This 220 mm mouth is common to the whole family, which explains why the cap fits Star Plus, Ice, Mulhacen, Victoria, Vesuvius and Volcano. The internal crepinas and the lower manifold do depend on the diameter of the body and are specific.

When to replace each part - actual symptoms

Maintenance that extends the life of your Astralpool Star Plus

Regular flushing when the pressure gauge rises 0.3-0.5 bar above the clean pressure. Each filter has a normal working pressure (usually between 0.5 and 0.8 bar clean). When it rises 0.3-0.5 bar above, it is time to wash (valve on "Backwash" for 2-3 minutes, then "Rinse" for 30 seconds, back to "Filter"). Do not wait for pressures of 1.5-2 bar to flush: it stresses all internal parts and the connection to the pump.

Tighten the cover screws evenly. The Star Plus have a cover with a screwed fixing ring. It is important to tighten the screws in diagonal and stepwise (do not tighten one to the maximum and then the next: go through them all at 50%, then 80%, then 100%). Unequal tightening deforms the ring and causes leakage at the seal.

Replacement of sand/filter glass every 4-7 years. Silica sand or filter glass are not eternal: they lose capacity over time and become cemented. If after flushing the pressure does not drop to the previous clean level, the filter media is exhausted.

Visual check of the pressure gauge and selector valve at the beginning of each season. Pressure gauge does not mark or remains fixed at zero → replace. Selector valve moving with difficulty or leaking from shaft → check internally.

Winter storage in areas with frost. Partially empty the filter body or leave the selector valve on "Winter" to prevent frozen water from cracking internal parts.

Basic diagnosis of common problems

If the problem persists after replacement of the candidate part, the technical service can value the complete equipment.

Can't identify your part or the diameter of your filter? Send us a photo of the filter and the label. Contact us: https://www.quimipool.com/en/use-our-form-to-contact-us See also: Pool filters Astralpool │ Swimming pool purifier spare parts │ Selector valve spare parts │ Technical Service │ Spare parts