Sugar Valley Aquascenic Spare Parts

Replacement Parts for the Sugar Valley Aquascenic: Cells, Ionization Vessels, and Cu/Ag Electrodes

The Aquascenic is not a standard salt chlorinator. It is a combined treatment system: on one hand, salt electrolysis (the RCB cell that converts salt into chlorine), and on the other, copper-silver ionization (a vessel with copper electrodes that provides a complementary algaecidal and bactericidal effect). Two technologies, two families of consumables —and that is why its list of replacement parts is the most extensive in the Sugar Valley line.

Here is the complete list with prices: RCB16, RCB33, and RCB50 cells; ionization vessels with 2, 4, and 6 electrodes; Cu/Ag electrodes and nuts; pH and redox probes; cables by number of outlets; and expandable modules.

As an official Sugar Valley E-Partner, everything is genuine manufacturer’s equipment with its warranty. And here’s a tip that could save you hundreds of euros: some cells come in different versions depending on your equipment’s year of manufacture. Let’s look at that first.

Related categories: Sugar Valley equipment replacement parts · Sugar Valley Hidrolife replacement parts · Salt chlorinator replacement parts · Sugar Valley salt chlorinators · Salt chlorinators · Water analysis

Section 1 — Electrolysis: RCB cells (pay attention to the year!)

Here’s the most important thing to note on this page: for the RCB33 and RCB50, there are different versions depending on the equipment’s year of manufacture, and they are not interchangeable. With prices ranging from 599 to 1,355 €, and since these parts are non-returnable, checking compatibility beforehand is essential.

Locate the model, year, or serial number on the device’s label, and send us a photo via the contact form before purchasing. We’ll confirm the exact part number within a few hours.

Section 2 — Ionization: Copper Tubes and Electrodes

The feature that sets the Aquascenic apart. The ionization chamber houses copper electrodes that release ions into the water; the number of electrodes depends on the size of your unit.

The number matters: the cup, electrodes, and cable must match your device’s configuration (2, 4, or 6). Count them before ordering.

Block 3 — Cell Assembly

Block 4 — Measurement, Calibration, and Modules

Quick Diagnosis: From Symptom to Part

Habits That Extend the Life of an Aquascenic

1. Keep the pH precisely between 7.2 and 7.4. Salt electrolysis naturally raises the pH, and a high pH accelerates calcification on the plates. This is the number one factor affecting cell lifespan
2. Clean only when scale is visible —and the transparent bracket lets you see it without disassembling anything. Use very dilute acid (1 part acid to 10 parts water, adding the acid to the water) and only while it’s bubbling. Never scrape with metal
3. Winterize with a blind plug. When the water temperature is below ~15 °C, electrolysis produces almost no usable chlorine but continues to wear down the plates. Remove the cell, install the plug, and store it clean and dry
4. Check the ionization electrodes at the startof the season: they are consumables, and their wear is gradual and imperceptible

Can’t find the replacement part for your Aquascenic, or unsure which cell version it uses? Call us at 91 128 55 90 or send us a message via the contact form with a photo of the unit’s label —we need the model number and year, because the RCB33 and RCB50 come in different versions that aren’t interchangeable. With parts costing up to €1,355 that are non-returnable, that photo is the best investment you’ll make on your order. And don’t forget the part that makes your unit special: the copper electrodes also wear out —check them when you start up your system for the season. See also Sugar Valley equipment replacement parts, Hidrolife replacement parts, salt chlorinator replacement parts, and Sugar Valley salt chlorinators.