Sugar Valley Hidrolife Spare Parts

Replacement Parts for the Sugar Valley Hidrolife Chlorinator: RC Cells, Electrodes, and Modules

The Sugar Valley Hidrolife is a salt-based chlorinator with integrated pH and redox control: it not only produces chlorine from salt, but also measures and regulates water parameters. This means it has two types of consumables instead of one—the electrolysis cell and the measurement electrodes —and one important feature to note: its electronics can be expanded with modules.

On this page, you’ll find the complete parts list with prices: the four RC cells (8, 16, 22, and 33 g/h), the bracket and nut, the pH and redox electrodes with their calibration solutions, and the temperature, flow, and salinity modules. As an official Sugar Valley E-Partner, all items are genuine manufacturer products covered by the manufacturer’s warranty.

Let’s start with the most common question: which RC cell is installed in your unit?

Related categories: Sugar Valley equipment replacement parts · Salt chlorinator replacement parts · Sugar Valley salt chlorinators · Salt chlorinators · Water analysis · Technical service

RC Cells: The Number Represents Output

The cell’s name includes its key specification: RC followed by the grams of chlorine per hour. Your unit is equipped with a specific model, and the replacement must be exactly that one.

Where to find it: Your unit’s model name (for example, Hidrolife 22) and the chlorine generator label indicate the output. And since the cells are specific parts that cannot be returned once installed, if you have even the slightest doubt, send a photo of the label via the contact form —we’ll confirm the part number within hours. Plus, shipping is free on any of these four models (they exceed 150 €).

Cell installation: bracket, nut, and cap

Measurement and calibration electrodes

The Hidrolife measures and regulates, and to do so, it needs electrodes in good condition. Typical service life: 2–3 seasons.

Replace the solutions every season. An expired solution is the number one cause of failed calibrations—and it makes you suspect the electrode when the electrode is actually working properly.

Modules and electronics: the Hidrolife can be expanded

A unique feature of this product line that many people are unaware of: the electronics support additional modules that can be integrated into the existing system.

These modules are also compatible with devices Hayward that share the same electronics. Before ordering one, please confirm compatibility with your specific version by contacting us via the contact form.

Quick Diagnosis: From Symptom to Part

The Three Habits That Double Cell Lifespan

1. pH maintained at 7.2–7.4. Salt electrolysis naturally raises the pH, and a high pH accelerates calcification on the plates. This is the number one factor
2. Clean only when scale is visible —and the transparent bracket lets you see it without disassembling anything. Use very dilute acid (1 part acid to 10 parts water, adding the acid to the water) and only while it’s bubbling. Never scrape with metal: the coating won’t regenerate
3. Winterize with a blind plug. When the water temperature is below ~15 °C, electrolysis produces almost no usable chlorine but continues to wear down the plates. Remove the cell, install the blind plug, and store it clean and dry

Can’t find the replacement part for your Sugar Valley Hidrolife, or unsure which RC cell it uses? Call us at 91 128 55 90 or send us a message via the contact form with a photo of the unit’s label —with the model range and g/h confirmed, we’ll get the part to you right away. Remember that cells cannot be returned: that photo is the best investment you’ll make with your order. And keep in mind the two steps that will extend your unit’s life the most: maintain a pH of 7.2–7.4 year-round and use the blind plug in the winter. See also Sugar Valley equipment replacement parts, salt chlorinator replacement parts, Sugar Valley salt chlorinators, and technical service.