Anti-limescale CTX 600 in 5 lt

what is the use of Anticalcareo for swimming pools CTX 600 in 5 lts?

Particularly suitable for preventing the formation of scale and black spots caused by iron and manganese.

Dosage and instructions for use

Initial Treatment: Add 2.5 lts. of product per 100 m3 of water.

Maintenance Treatment: Add 0.5 lts. of product per 100 m3 of water once a week.

These doses are for guidance only and can be modified depending on the hardness and salt content of the water.

Pools that are not emptied during the winter period should be treated with an initial dose of product at the end of the bathing season.

Dilute the required amount of product in a container with water and spread evenly over the entire surface of the pool, keeping the filtration equipment running.

HAZARD IDENTIFICATION

Classification of the mixture.

According to Regulation (EU) No 1272/2008:

• Eye Dam. 1 : Causes serious eye damage.
• Skin Corr. 1A : Causes severe skin burns and eye damage.

Label elements.

Labelling according to Regulation (EU) No 1272/2008:

Pictograms:

Warning word:

Danger

H-phrases:

• H314 Causes severe skin burns and eye damage.

P-phrases:

• P101 If medical advice is needed, have container or label at hand.
• P102 Keep out of reach of children.
• P103 Read label before use.
• P260 Do not breathe vapour.
• P264 Wash hands thoroughly after handling.
• P280 Wear protective gloves/protective clothing/eye protection/face protection.
• P501 Dispose of contents and/or container as hazardous waste by handing it over at a clean point.

Contains:

• Sodium hydroxide.
• Polymer with 2-propenonitrile.

Other hazards.

Under normal conditions of use and in its original form, the product has no other adverse effects on health and the environment.

Emergency telephone number:

Toxicological Information Service (National Institute of Toxicology and Forensic Sciences) Telephone: +34 91 5620420. Information in Spanish (24h/365 days). Only for the purpose of providing health response in case of emergency.