Spare parts filter Astralpool Ice
- Filter replacement Astralpool Manometer 1/8" 3 Kg/cm
- Replacement filter Astralpool Complete pressure gauge
- Replacement filter Astralpool Black cover set with gasket and screws
- Spare filter Astralpool Screw cap fixing ring
- Spare filter Astralpool Black cover D.220 with gasket
- Replacement filter Astralpool Transparent cover D.220 with gasket
- Replacement filter Astralpool O-ring O-ring cover screws
- Replacement filter Astralpool Screw cap neck ring
- Filter spare part Astralpool Threaded cover neck gasket 255x4
- Replacement filter Astralpool Racord 1" 1/2 and O-ring
- Replacement filter Astralpool Racord 2" and o-ring
- Replacement filter Astralpool Diffuser diameter 50 mm
- Replacement filter Astralpool Diffuser cone diameter 63
- Replacement filter Astralpool Terminal male thread 1" 1/2
- Spare filter Astralpool 2" male thread terminal
- Collector arm 1" 110 mm. filter Astralpool
- Collector arm 1" 225 mm. filter Astralpool
- Replacement filter Astralpool Water drain 3/8"
| Position | Product | Quantity | Unit price |
|---|---|---|---|
| 1 |
Regular price
9,90 €
Sale price
Regular price
|
||
| 2 |
Regular price
24,90 €
Sale price
Regular price
|
||
| 3 |
Regular price
53,91 €
Sale price
Regular price
|
||
| 4 |
Regular price
19,90 €
Sale price
Regular price
|
||
| 5 |
Regular price
23,63 €
Sale price
Regular price
|
||
| 6 |
Regular price
27,90 €
Sale price
Regular price
|
||
| 7 |
Regular price
5,90 €
Sale price
Regular price
|
||
| 8 |
Regular price
59,90 €
Sale price
Regular price
|
||
| 9 |
Regular price
11,87 €
Sale price
Regular price
|
||
| 10 |
Regular price
16,90 €
Sale price
Regular price
|
||
| 11 |
Regular price
13,75 €
Sale price
Regular price
|
||
| 12 |
Regular price
10,74 €
Sale price
Regular price
|
||
| 13 |
Regular price
18,30 €
Sale price
Regular price
|
||
| 14 |
Regular price
9,90 €
Sale price
Regular price
|
||
| 15 |
Regular price
11,20 €
Sale price
Regular price
|
||
| 16 |
Regular price
2,55 €
Sale price
Regular price
|
||
| 17 |
Regular price
2,55 €
Sale price
Regular price
|
||
| 18 |
Regular price
7,90 €
Sale price
Regular price
|
Filter Breakdown Astralpool Ice: all parts with prices
The Ice is one of Astralpool ’s sand filters with a 220-mm screw-on top cap, and its parts list is one of the brand’s most comprehensive: eighteen parts ranging from the pressure gauge to the bottom collection arms, with prices ranging from €2.55 to €59.90.
Here’s the complete list, organized into four sections: lid and closure, controls, connections, and interior. As an official E-Partner of Astralpool, all items are genuine manufacturer parts with a warranty.
And here’s a time-saving tip: many of these parts are compatible with other Astralpool screw-top filters (such as the Star Plus, among others), so if your filter is part of that family, you’ll likely find what you’re looking for here as well.
Related categories: Pool filtration system replacement parts · Astralpool filters · Selector valve replacement parts · Filter media · Pool filters · Replacement parts
Zone 1 — Cover, gasket, and seal
| Replacement part | Estimated price | What it does and when to replace it |
|---|---|---|
| Screw cap O-ring | €5.90 | The key part and the cheapest one. If there’s any leakage from the cover, start here—never by tightening the screws further. |
| Black D.220 cover with gasket | €23.63 | The standard cap, with gasket included. Replace if it shows cracks. |
| Transparent D.220 cover with gasket | €27.90 | The option with a viewing window: allows you to check the condition of the filter media without opening the filter. For just €4.27 more than the black one, it’s the logical choice. |
| Black lid set with gasket and screws | €53.91 | The complete set: lid, gasket, and hardware. For when the screws are also damaged. |
| Lid mounting ring with screws | €19.90 | The ring that distributes the torque from the screws across the lid. Replace if cracked or warped. |
| Lid neck ring for screws | €59.90 | The neck of the body where the cover sits. The most expensive part in the parts list—replace only if it is cracked. |
| Threaded Lid Neck Gasket 255x4 | €11.87 | The neck gasket. Check it whenever you work in that area. |
Zone 2 — Control and Bleed
| Replacement Part | Estimated price | What it does and when to replace it |
|---|---|---|
| 1/8” Pressure Gauge, 3 kg/cm² | €9.90 | Just the gauge, if the housing is intact. The €10 repair restores the filter’s control panel. |
| Complete pressure gauge | €24.90 | The assembly with its mounting bracket. For when the thread or bracket is also damaged. |
| 3/8” Water Drain | €7.90 | The bottom drain. This is the key component for winterizing: it opens to drain the body and prevent ice from cracking it. |
Zone 3 — Connections by Diameter
Here, the diameter of your system determines the size: 1½” (50 mm pipe) or 2” (63 mm).
| Replacement Part | Estimated price | Size |
|---|---|---|
| 1½-inch fitting with O-ring | €16.90 | 1 1/2" |
| 2” fitting with O-ring | €13.75 | 2” |
| 1 1/2" male threaded end cap | €9.90 | 1 1/2" |
| 2” Male Threaded Fitting (2 pcs) | €11.20 | 2”, pack of 2 |
| Diffuser Ø 50 mm | €10.74 | For 50 mm connection |
| Diffuser cone Ø 63 mm | €18.30 | For 63 mm connection |
Zone 4 — Indoor: manifold arms
The collector arms are the slotted “fingers” at the bottom that allow water to pass through while trapping sand. If sand appears in the pool, this is where the problem lies. In the Ice model, they are 1”:
| Replacement Part | Estimated price | Size |
|---|---|---|
| 1-inch collector arm, 110 mm | 2.55 € | 110 mm |
| 1” collector arm, 225 mm | 2.55 | 225 mm |
Measure the arm you’re replacing from the thread to the tip. And at €2.55 per unit, when you open the filter and find a broken one, replace the entire set: the others are just as old, and opening the filter accounts for 90% of the work.
Quick Diagnosis: From Symptom to Part
| Symptom | Most Likely Cause | Part to Check |
|---|---|---|
| Sand in the pool | Cracked or loose return arm | 1-inch return arms; check that all are tight |
| Leak from the cover | Expired O-ring | O-ring (€5.90) before tightening the screws further |
| Cracked cap or stripped screws | Aging due to sun exposure and chemicals | Cap (black or clear) or complete assembly with screws |
| The retaining ring does not distribute the clamping force evenly | Deformed or cracked retaining ring | Clamping ring |
| Leak at the body neck | Worn neck gasket | Neck gasket 255x4; then neck ring |
| The pressure gauge does not register | Faulty gauge | 1/8” pressure gauge (or replace the entire assembly if the mounting is damaged) |
| Leak at the pipe connection | Fitting or its O-ring | Fitting of the correct diameter |
| Leak at the base | Damaged drain | 3/8” water drain |
| High pressure that does not drop during flushing | Saturated or clumped media | Sand or filter glass |
Backwash based on pressure, not on a schedule
Note the pressure on the gauge after the filter has just been washed—that’s your baseline. When it rises 0.3–0.5 bar above that, it’s time to wash and rinse.
If the pressure doesn’t return to the reference point after flushing, the filter media is saturated: it’s time to replace the media (every 4–6 seasons with properly balanced water). And if the needle doesn’t move or doesn’t return to zero, the pressure gauge is faulty—€9.90 to replace the filter’s only diagnostic tool.
Can’t find the replacement part for your Astralpool Ice filter? Call us at 91 128 55 90 or send us a message via the contact form with a photo of the filter, its label, and the part to be replaced. And keep these two key points in mind for this filter: the €5.90 O-ring fixes lid leaks — never by tightening the screws further — and the €2.55 collector arms are the most cost-effective repair when sand appears in the pool (make sure they’re 1”, not 3/4”). See also pool filter replacement parts, Astralpool filters, selector valve replacement parts, and filter media.