Swimming pool pumps
Other categories of Pumps
Brand
Power (hp)
Type of current
For Filters
Flow rate m3/h (at 10 mca)
Variable Speed
- -€11.00
- Out-of-Stock
- -€20.00
- -€10.00
- -€8.00
- -€7.00
- -€64.00
- -€46.00
- -€45.00
- -€30.00
- -€41.00
- -€35.00
- -€35.00
- -€26.00
- -€37.00
- -€27.00
- -€59.00
- -€59.00
- -€53.00
- -€51.00
- -€66.01
- -€54.00
Pool pumps are an essential tool for keeping a pool clean and in good condition. They are the heart of the circulation system, as they create the water flow that allows the chemicals to circulate evenly throughout the pool, effectively disinfecting and removing dirt.
In this section you can find a multitude of pool pump models. The main brands such as Astrapool pool pumps, with their Victoria, Sena, Alaska and Maxim models; or the pool pumps Espa, with their consolidated models such as Iris Silen and Silen 2, as well as all the necessary filters so that you can choose the pool pump you are looking for.
how to choose a pump for my pool?
Surely more than once you have asked yourself what type of pool pump you need, at Quimipool we will help you. To choose the right pool pump for your pool, the following factors must be taken into account: flow rate, filter diameter and power.
The pump is the tool that allows the filter to work properly, in other words, it is the key to the hydraulic installation of the pool. Without it, nothing would be possible. If the power is lower than the capacity of the filter, the water will not be properly purified.
Flow rate, filter and power
On the other hand, filters have a limited capacity and, if they become saturated, they will return dirty water back into the pool. Therefore, in addition to calculating the power of the pump you need, you must also buy a suitable filter.
It is important to consider the volume or capacity of the pool. The filtering process that is usually taken as a reference is the one that lasts 6 hours.
Taking into account the volume of your pool and the duration of the standard filtration process, we are going to see what pumping capacity we need so that all the water in the pool passes through the water purification and cleaning system in those 6 hours.
Minimum pumping capacity required= Pool volume / filtration duration
Example: a pool of 100m3 volume that we want to process in a time of 6 hours (standard process) will need the pumping capacity of:
100m3/6= 16,66m3/h or 16.660 l/h
Therefore, you should choose a pump with a pumping capacity or flow rate of more than 16.66m3.
in order to enjoy a refreshing swim in crystal clear water, it is important to pay attention to the characteristics of your pool in order to choose the right type of pump!
Types of filtration pumps
There are several types of pool pumps. Below, we will briefly mention the characteristics of each of them:
Variable speed pump
It is easily adaptable to any pool, but it is also the most expensive and the most modern.
Auto-suction pump
They are the most commonly used and can be made of different materials such as plastic, cast iron, bronze, etc. They are commonly used in both private and public swimming pools.
Centrifugal pumps
They are more common in large pools, mainly in private pools.
Electric power pump
There are models that work with single-phase 230V networks, which are the most common in homes, and three-phase 380V networks. It is important to be clear about the power, because if you make a mistake you can damage the device.
how to install filters and pumps to a swimming pool?
To install a pump in a swimming pool, the place chosen should be ventilated and dry, whenever possible. This will prevent deterioration due to condensation and oxidation of the motor and electrical components. Of course, avoid installation in places that can be flooded.
Electrical installation of the pool pump
For its installation, it is essential to have an electrical panel that provides all the safety and protection guarantees for the use of an electric motor.
Rigid cables for connection to the mains are the most recommendable, in the case of flexible cables they must have terminals to connect them correctly to the motor terminals.
The electrical socket must be earthed, protected with a differential, the most common is that it does not exceed 30 mA. The thermal relay or circuit breaker must be adjusted to the current consumption of the pump. It is essential that the electrical connection conditions are respected, based on the indications of each manufacturer, in order to avoid problems with the guarantees.
iMPORTANT! The electrical installation must be carried out by a qualified professional to avoid the risk of electrocution in the event of improper connection.
Replacement of swimming pool pump
When replacing one pump with another, it is usually necessary to change the suction and discharge pipes, taking into account that they almost always have different dimensions than the old pumps. It is also important to check the physical space in the sewage treatment plant for proper ventilation of the motor.
Installation of swimming pool filters
The following factors must be taken into account when installing pool filters. Filters are usually related to the amount of water in the pool, so if the pool is large, you will need a large filter and this means that you will need more space to place it. It cannot be placed just anywhere, it must be at a short distance between them and the pool, to avoid losing pressure from the pool.
Steps to install the pool filters:
- Step 1
The first thing to do is to dismantle the old pump. To do this we move the pump handle to the closed position.
- Step 2
Dismantle the inlet and outlet pipes and unscrew the American unions. When carrying out this procedure, water will come out of the interior, so be careful not to leave any elements on the floor that cannot get wet.
- Step 3
Before removing the old filter, remove the sand. You can scoop out some sand with a bucket or small shovel, and once the weight has decreased (a unit weighs about 80 kg) you can move the filter to empty it completely.
- Step 4
Next, attach the equipment to the PVC water inlet and outlet pipes. Tighten the nuts on the equipment that connect the tank to the top cover.
- Step 5
To cushion the fall, before filling again with sand, add water to the pond. Finally, close the equipment and move the handle to the filtering position. Close the water flow to the pump, and fill the motor-pump tank with water. Open the skimmer and drain valves and turn the equipment back on for operation.
Frequently asked questions about swimming pool pumps
how many hours can a pool pump run?
Normally the pool pump will run for about 8 hours, although it could be 6 to 12 hours, depending on the size of the pool.
why does a pool pump burn out?
The pump is usually fitted with safety guards to prevent it from burning out. However, the pump motor can overheat, either due to lack of cooling or overwork. When this happens and the pump gets too hot or runs out of water, it automatically stops.
what happens if the pool pump is flooded?
If water enters the filter motor, a short circuit will occur. Before restarting it, you will have to wait for the motor and the other components to dry out completely. Leave them in the sun for a few days, that will be enough.
is there any maintenance to be done on the pump?
The only thing to do is to periodically empty the pre-filter basket of impurities, and every time it is cleaned it is advisable to check the correct fastening of the mechanical parts, the state of the pump support screws or the presence of incrustation remains that may indicate water loss.
why do pool pumps break?
Pool pumps can break for various reasons:
- Bearings in poor condition.
- Turbine in poor condition.
- Motor winding short-circuit.
- Overheated motor.
- Mechanical seal in poor condition, among others.