Pressure controller Press kit 2p

Press kit 2p

The electronic controller commands the pump to start and stop when any tap or valve in the installation is opened or closed respectively. When the pump starts, it keeps running as long as any tap is open, transmitting constant flow and pressure to the mains.

For this function, the Kit-02 or also called Hidropress 02 has a patented sensor whose mission is to maintain the connection of the pump while there is a minimum consumption of 8 l/min.

what does the controller include?

• Manual start button
• Manual anti-water hammer manual check valve
• Safety system that prevents the pump from running without water.

Construction characteristics of the Press kit 2p

• Body: Non-toxic thermoplastic with PV.
• Diaphragm: Special natural rubber
• Spring:Steel DIN17223 C/84
• Seals:Special synthetic rubber
• Valve-sensor:High-strength technical thermoplastic.
• Magnets:Alnico magnets inserted and hermetically sealed with ultrasonic welding.
• Electronic circuit: FR4 with protective housing and integrated terminal strip in self-extinguishing plastic material V0.

Technical characteristics

Max. pressure: 10 bar

Max. current: 6(8)A - 1,5 kW (2 HP)

Max. flow rate:10 m3/hour