Vigilex 600 MA bilge pump
- Vigilex 600 MA drainage pumps
- Very compact for drainage, evacuation of loaded and dirty waters
- Infiltration water and emptying of ponds,
- Swimming pools and tanks and in permanent installations to prevent flooding of basements.
Technical characteristics
Applications of the dewatering pump Espa Vigilex 600 MA:
Very compact submersible pumps for drainage, evacuation of loaded and dirty water, infiltration water and emptying of ponds, swimming pools and tanks and in permanent installations to prevent flooding of basements.
They are also used in water transfers between tanks and cisterns and emergency emptying of drains, garages and flooded basements and even drains with sewage.
Supplied with 10 m of electric cable with plug and level switch to automate its operation depending on the water level; it can be easily disassembled externally.
Completely made of plastic materials, it allows very easy handling for any type of domestic application with dirty water. They allow a significant passage of solid particles of up to 24 mm, which makes them useful and suitable for operation in loaded water thanks to the design of its hydraulics with vortex displaced impeller.
The motor is cooled with the same water as the discharge water.
Includes grooved fitting for hose or 1" male thread with flat gasket for existing connections.
General features of the Vigilex Series Espa:
- Carrying handle: Included
- Stand / Base: Included
- Pre-filter: Included
- Fittings: Glued
- Purge Plug: No
- Check valve: No
- Electrical Characteristics
- Electrical insulation: Class F
- Service factor: S2
- Degree of protection: IP68
- Reset: Automatic
- Motor type: Asynchronous
- Motor rotation type: Constant speed
- Service type: Continuous
Constructive characteristics of the series Espa Vigilex:
- Discharge diameter: D25
- Stages: Single-stage centrifugal pump
- Solids passage (mm): 24
- Motor cooling: Water
- Type of connection at discharge: Hose fitting
Materials of the Vigilex series:
- Suction body: PP + 30% GF
- Discharge body: PP + 30% GF
- Enclosing body: PP + 30% GF
- Pump shaft: Stainless steel AISI 420
- Motor casing: PP + 30% GF
- Impeller/s: Polyamide filled with GF
- Base-foot material: Technopolymer
- Stamp holder: PP + 30% GF
- Pre-filter: Technopolymer
- Screws: Stainless steel AISI 304
- Limits of use
- Maximum number of motor starts (starts/minute): 0,5
- Temperature of the liquid (ºC): Min: 4 - Max: 35
Data Sheet
- Manufactured in
- Plastic
- Type of water
- Dirty Waters
- Power (hp)
- 0.75 HP