Sand Shark automatic pool cleaner
- Sand Shark Cleaner
- Hydraulic system
- Brushes and vacuums
- Includes 10 lengths of hose
- Regulating valve and inlet adaptor
- Bottom only cleaning
- Requires at least a 3/4 HP filter pump
- Hydraulic pool cleaner. To ensure that this model is suitable for your pool: Contact us and we will advise you!
Technical characteristics
what type of pools is the pool cleaner Pentair SAND SHARK suitable for?
For all types of pools up to 10 x 5 m.
Bottom cleaning equipment. Hydraulic equipment is not programmed in the software to clean the walls, although it can clean them on some occasions if a series of conditions are met.
New model of hydraulic pool cleaner corresponding to the evolution of the POOL SHARK range.
- Equipped with a new chassis and pads with fins that scrape and suck up the dirt
- With exclusive Smart Trac system that moves the cleaner anywhere in the pool
- Very easy to use and install. Supplied with 10 x 1m lengths of hose together with an extra flexible 30cm length, as well as regulating valve and adaptor for pool cleaner or skimmer connection.
- For pools up to 10 x 5 with central pool cleaner connection.
- Minimum power required for operation 3/4 hp (9.000-10.000 l/h)
- No bags, no electrical connection.
The new SandSharkTM is the latest evolution in automatic pool cleaning technology. SandShark cleans in two stages.
It cleans your pool by loosening stubborn dirt particles with its rows of small rubber scrubbers. Then it instantly vacuums up the debris and sends it back to your pool's filtration system... where it belongs.
Thanks to SandShark, manual vacuuming and dirty pools are about to become extinct.
SandShark features exclusive SmartTrac programmed steering. SmartTrac ensures complete cleaning coverage of your pool and allows you to manoeuvre the SandShark around corners, stairs and steps. It's truly a "set it and forget it" pool cleaner.
Two-stage cleaning action: the unique base design scrubs and loosens dirt from the pool surface while its powerful vacuuming action removes it.
The wide body design allows the SandShark to cover a wide 12" cleaning path for fast cleaning.
Set it and forget about it
Remove the SandShark pool cleaner from the box, attach the hose, place it in the water and watch it attack the dirt roaming the bottom and sides of your pool.
Key features:
- No installation required, just connect it to the hose and go.
- It devours everything in its path, such as dirt, sand, pollen, leaves, twigs and insects while helping to remove algae, debris and debris from your pool.
to remove algae, scale residue and soft calcium deposits.
- The adjustable throttle valve and free-flow gauge allow you to set the correct cleaning speed to ensure the most effective cleaning possible.
- No annoying bags to empty, no wheels, diaphragms or bags to replace.
Purchase Contents:
- Cleaner Pentair SandShark
- 10 x 1m lengths of hose.
- One 30 cm flexible section.
- Regulating valve
- Adapter for pool cleaner socket.
Warranty: 2 years
Data Sheet
- Years of guarantee
- 3 years
- Maximum pool size
- 45-50 m2
- Type of use
- Private Swimming Pool
- Type of cleaner
- Hydraulic Suction
- Minimum pump size
- 3/4 HP
Verified Reviews
Marcos G. published the 21/06/2023 following an order made on 04/06/2023
llegó en perfectas condiciones. Falta comprobar su correcto funcionamiento.
Anonymous customer published the 07/04/2022 following an order made on 31/03/2022
Este producto lo conozco con anterioridad.