Pro water spa kit
ref: 14SSPROWATER
- Water kit for on-site spas.
- Consisting of:
- 1 ESPA Wiper3 200M single-phase pump (2 HP)
- 2 suction grids
- 2 white air controllers 1/2"
- 12 white ABS micro jets
€719.00
IVA included
Free shipping
Bought together Usually
Actual product
Items:
1
Total price:
€719.00
Technical characteristics
KIT CONSISTING OF:
- 1 ESPA Wiper3 200M single-phase pump (2 HP).
- 2 white ABS suction grilles.
- 2 white 1/2" air controllers.
- 12 white ABS microjet.
Description Pool pump Espa Wiper3 200M
Equipment
- Foot / Base: Included
- Fittings: Glued
- Drain plug: No
- Check valve: No
- Electrical characteristics
- Electrical insulation: Class F
- Service factor: S1
- Degree of protection: IP55
- Reset: Automatic
- Motor type: Asynchronous
- Motor rotation type: Constant speed
- Type of service: Continuous
- Constructive characteristics
- Intake diameter: D63
- Discharge diameter: D63
- Sealing by: Mechanical seal
- Stages: Single-stage centrifugal pump
- Motor cooling: Fan
- Suction connection type: Push-in fitting
- Type of connection on discharge side: Push-in fitting
- Impeller type: Closed
Materials
- Mechanical seal: Graphite-Steatite
- Suction casing: PPO + 30% GF
- Discharge casing: PP + 30% GF
- Pump shaft: AISI 431
- Motor shaft: Stainless steel AISI 431
- Motor casing: Aluminium
- Impeller(s): PPO + 30% GF
- Seals: NBR
- Base-foot material: PPO + 30% GF
- Seal base material: PP + 30% GF
- Screws: Stainless steel AISI 304
SUCTION GRILLE IN WHITE ABS
- Allows the spa floor to be left free, improving the user's experience.
- 2" section with elbow for gluing to Ø50 mm pipe.
- Made of white ABS and PVC.
FLEXIBLE RUBBER PNEUMATIC PUSH BUTTON
what is a pneumatic push button used for?
It is used to start and stop the massage and hydromassage functions in spas, jacuzzis or removable pools.
how does the pneumatic button work?
By pressing the pneumatic push button, the air signal is transmitted, which activates a pneumatic switch to start the air pump and thus start the blowing nozzles. If the nozzles are in operation, pressing the push button again will transmit an air signal to stop the pump and thus stop the blowing nozzles.
1/2" WHITE AIR CONTROLLER
- Particularly suitable for whirlpool baths, spas, jacuzzi...
- Controls the amount of air sucked in by the jets, thanks to the Venturi effect.
MICROJET ABS WHITE
- Made of white ABS.
- Includes an adaptor to connect to the water supply pipe, and Venturi to glue smooth interior Ø32 mm.
- Adjustable nozzle.
Might Also like
