Skimmer square lid

Skimmer Coral 18011305

• 15 lt. skimmer, with UV treatment on the parts that are not buried
• Made of white ABS, with gate float and flow regulation flap.
• Lower suction connection: 1 ½" internal thread and 2" external thread.
• Simultaneous connection to the drain: internal Ø 50.
• Upper connection for excess water evacuation Ø 40.
• We recommend the square top skimmer as it is easier to finish with the stone.

Let's talk a little about the skimmers.

Made entirely of white ABS, they suck up the surface film and retain large waste. For this purpose they incorporate a large capacity leaf basket. They are treated against UV rays to prevent deterioration. They have two lower suction connections with internal and external thread, in addition to the connection to the drain and the water evacuation connection.

Manufacturer's recommendations on skimmer installation.

- The skimmers should be installed downwind of the prevailing wind to avoid areas of stagnant dirt.
- The water level should be situated at 2/3 of the height of the skimmer mouth and we will achieve a more efficient cleaning of the surface.
- We recommend installing a skimmer for every 25 m2 of water surface area, bearing in mind that for 15 l skimmers we recommend a maximum flow rate of 5 m3/h.