- Out-of-Stock
Glue Puma Pegoland 25 Kg.
ref: 17REPEGAMENTO
- High performance cementitious adhesive.
- Reduced slip and extended open time.
- Ideal for indoor and outdoor floor tiling.
- Especially recommended for tiling swimming pools with gresite
- 25 kg bag.
€10.25
IVA included
Technical characteristics
Pegoland Swimming Pool Adhesive
High-performance cementitious adhesive with reduced slip and extended open time, for fixing interior and exterior flooring, interior cladding and exterior skirting boards.
Particularly recommended for tiling swimming pools with vitreous mosaic and for tiling plasterboard partition walls (PYL type). For gluing ceramic tiles with medium-high absorption degree, marble, mosaic and glass paste.
Composition
Product based on high-strength cement, selected aggregates, additives and synthetic resins that guarantee high bonding strength, good workability and resistance to ageing.
Characteristics and applications
- Reduced slipperiness. Excellent initial adhesion.
- High open time, allows the grinding of parts.
- Avoidance of wetting parts or substrates thanks to its water retention power.
- Adhesion of ceramic pieces with medium-high absorption degree.
- Application in interiors, exterior paving and skirting boards.
- Swimming pool cladding.
Instructions for use
- Add water and mix manually or mechanically until homogeneous and workable consistency.
- Leave the dough to rest for about 5 minutes and knead again.
- Spread the kneaded product on the substrate with a trowel in a maximum extension of 2m2.
- Comb with a notched trowel to regulate the thickness.
- Place the pieces on the fresh adhesive, pressing and moving until the grooves are completely flattened and the entire surface of the ceramic is correctly adhered.
- Respect the construction joints (expansion, contraction, splitting, perimeter corner joints) and tile-to-tile joints (minimum 2 mm inside and 5 mm outside).
- The joints shall be filled after 24 h. in vertical surfaces and 48 h. in floorings. Use the appropriate mortar from the MORCEMCOLOR range, depending on the type of joint.
NOTE: The shorter the time between combing and laying the tiles, the better the results will be.