Automatic pool cleaner Aquabot Bravo

The AQUABOT BRAVO is an automatic pool cleaner, with a new and updated technology, equipped with the Aqua Smart system: it can change direction on the bottom of your pool without any additional devices such as pistons, motors, etc. A highly intelligent mathematical algorithm allows the robot to cover the bottom and walls of the pool systematically and without wasting time.

The AQUABOT BRAVO Aqua Smart is designed to clean residential pools up to 80 m2. The Bravo, with its new cleaning programme, contains a carbon-free steering motor and a filtration pump operating at 12 volts.

The light weight of the unit and the PVA brushes allow the Aquabot Bravo to climb even on ceramic surfaces, picking up dirt and chemical debris all the way down to the water level.

The Aquabot Bravo automatically sweeps, vacuums and filters the dirt from the bottom and walls of the pool and puts everything it collects into its internal bag.

It cleans the entire pool(bottom, walls and water line). The cleaning cycle lasts 1.5 hours.

Includes 18-metre self-floating cable plus transport trolley, designed to move the cleaner, cable and transformer effortlessly.

The automatic pool cleaners Aquabot follow a strict quality control.

Advantages of the Aquabot Bravo:

• Operates safely and economically at 12 volts.
• Ultra-modern, high-speed motors combine efficiency and speed.
• Totally independent.
• They work without being connected to any hoses, additional motors or pool suction pipes.
• No installation or supervision required.
• Minimal maintenance.
• And when the cleaning cycle is finished, the Aquabot will stop and switch off automatically.
• Warranty: 4 years/ 500 cycles on motors, 2 years on transformer and cable.

Technical characteristics:

• Recommended pool size: Up to 80 m2.
• Volume of filtered water: 16 m3 /hour.
• Cleaning coverage: 550 m2 /hour.
• Flotation cable: 18 m.
• Voltage: 12 V.
• Electrical Specifications: 230 V / 50 Hz.
• Steering Motor: 1 High Speed 24 V. cc (s/c) motor.
• Pumping Motor: One 24 V. cc (s/c) motor.
• Filter bag specifications: 2 Micron Re-usable.
• Equipment dimensions: 43x38x26 cm.
• Packaging dimensions: 50x18x43 cm.
• Weight of equipment: 7,50 Kg.
• Shipping weight: 15 Kg.