PH regulator Zodiac pH Perfect model

PH regulator Zodiac pH Perfect

Water is an unstable element that is constantly changing, which is why it is necessary to disinfect and balance its pH.

Automatic pH regulation is an indispensable element for optimal bathing comfort.

The pH Perfect integrates proportional dosing technology in order to automatically maintain an ideal pH for the comfort of bathers.

Automatic operation.

• Thanks to a microprocessor, the pH Perfect optimises the injection of the corrective product according to the pH of the pool.
• The pH Perfect measures the pH value by means of a pH probe fitted in the filtration system, which constantly analyses the pool water.
• Depending on the value measured, the pH Perfect adjusts the pH of the pool using its dosing pump by adding a liquid corrective product.

The dosing time is adapted according to the deviation of the pool's pH from the ideal pH. In this way, the balance of the pool water is always maintained at the desired value without the need for any intervention.

what type of pools is the Zodiac pH Prefect suitable for?

PH Perfect is suitable for all types of pools, liners and treatments.

• For the comfort of bathers, the pH of the pool must be maintained between 7.2 and 7.4.
• Below this pH, the water is aggressive and above this level, a higher dose of disinfectant is needed to prevent algae growth.

Automated water balance.

• Compatible with all types of water treatment, manual or automatic.
• Automatic regulation by proportional dosing of the corrective product (acid or alkaline).
• Easy parameter setting thanks to the LCD menu.
• Permanent display of the pH of the water.
• Rapid reliability check of the probe.

Technical characteristics pH Perfect

• 50 Hz power supply: 220-240 V AC.
• Power consumption: 9 W.
• Primary safety: 500 mA T.
• Maximum theoretical pump flow rate: 1.5 l/h.
• Maximum pressure (at injection point): 1.5 bar.
• Collar for probe/injection support: for 50 or 63 mm diameter tubes
• PH control range: 0.0 pH - 14.0 pH.
• Accuracy: +/- 0.1 pH.
• Probe type: combined, single junction, Kcl, polymer gel and epoxy body diameter 12 mm.
• Semi-automatic probe calibration: by buffer solutions (in 1 or 2 stages).
• PH probe tolerance: 6 bar / 60ºC.
• Protection rating: IP65.
• Dimensions (L x W x H): 23.5 x 20 x 8.5 cm.
• Weight with packaging: 1.7 kg.
• Equipment warranty: 2 years. Incorrect installation of the pH probe will invalidate the warranty. The probe is a consumable that is not covered by the warranty, so it is up to the manufacturer to determine in each case whether or not the warranty is applicable.

General information about the pH Perfect.

• Display: LCD screen - 1 line & 16 characters.
• Pump: peristaltic 1.5 l/h.
• Calibration: semi-automatic (in 1 or 2 stages).
• Dosing: acid or alkaline. Proportional dosing.
• Set point: Adjustable.
• Safety: pH correction is automatic and optimised in order to stabilise the pH quickly, avoiding overdosing of the corrective product. There is an overdosing safety feature, which stops the injection of the correction agent if the set point is not reached within a certain time. The time is adjustable from 0 to 240 min.

Specific accessories:

• Suction cannula with level sensor (adapted to 5 to 25 litre containers).
• PH measuring probe.
• Buffer solution kit.
• Collars for installation on injection point pipe and probe.