Star Plus 600 filtration pack + Noxplus variable speed pump 1 CV + Glass

what is filtration?

Filtration is one of the most important tasks when cleaning and disinfecting our pool.

Within the filtration system, as an outstanding element, is the filter, since it is in charge of, as the water circulates through its interior, retaining the dirt particles in its filtering bed, either sand or glass, to later return the water to the pool crystal clear and suitable for swimming.

When selecting the ideal filter for our pool, several aspects must be taken into account, such as the size of the pool and the power of the pump that will accompany the filter.

In this way, we will be able to optimize to the maximum the performance of our filtration system and enjoy crystal clear water suitable for swimming

Star Plus 600 filter

• Recommended for pools up to 80 m3.
• Equipped with pressure gauge and air-water purge.
• Screw cover, with a new design.
• Includes 6-way selector valve of 1" 1/2.
• Assembled with collector and diffuser in unalterable plastic material.
• Filter made of reinforced polyester and fiberglass.
• Excellent satin red finish.
• Maximum flow rate: 15 m3/h.
• Filtration speed: 50 m3/h.
• Maximum working pressure: 2,5 kg/cm2.
• Sand load: 125 kg.
• Glass load: 112,5 kg.

ESPA Noxplus variable speed pump

ESPA Noxplus is the pool pump that incorporates the frequency inverter with an important innovation in its operation to adapt the set to the pool application: the variation of speeds in the work cycles.

Backwash system that, thanks to a specifically developed cycle, increases the efficiency of the process while shortening the cleaning time, drastically reducing the amount of water consumed and achieving an efficient cleaning.

Ultra-quiet (45 dB)

Longer service life

Energy and cost savings

Up to 5 years warranty

Main characteristics

MATERIALS

• Motor housing: aluminum
• Mechanical seal: alumina-graphite
• Intake body: technopolymer
• Enclosing body: technopolymer
• Discharge body: technopolymer
• Diffuser: technopolymer
• Motor shaft: stainless steel AISI-431
• Impeller: technopolymer
• Seals: NBR/EPDM
• Pre-filter: technopolymer

EQUIPMENT INCLUDED

• Suction and discharge connectors Ø50 mm
• Two meters of cable

CONSTRUCTION FEATURES

• Suction diameter: Ø50 mm
• Impulsion diameter: Ø50 mm
• Sealing: by mechanical seal
• Motor cooling: fan
• Type of suction connection: push-in fitting
• Type of discharge connection: push-in fitting

ELECTRICAL CHARACTERISTICS

• Electrical insulation: Class F
• Service factor: S1
• Degree of protection: IPX5
• Reset: automatic
• Motor type: asynchronous

LIMITS OF USE

• Maximum suction: 4 meters
• Maximum liquid temperature: 40ºC

Filtering glass

Saves in washing and water, as well as in energy costs and chemical treatments. Its angular shape and silica content improves turbidity by 30%. Generally collects finer particles from water than its silex equivalent. Its non-porous shape means that no lumps or preferential channels are formed. With superior permeability, washing requires less time, saving water, energy and chemical treatments.

It is less susceptible to "bio-fouling" due to its smooth surface, so bacteria cannot get trapped in cracks and crevices, resulting in less chemical use.

It is less dense than silex, requiring 15% less product.

It has a longer life because it does not degrade and does not need to be replaced.