Bomba dosificadora Seko PoolMatch pH 1,5 l/h
Bomba dosificadora Seko PoolMatch pH 1,5 l/h Bomba dosificadora Seko PoolMatch pH 1,5 l/h

Metering pump Seko PoolMatch pH 1.5 l/h with Modbus

ref: 05BDSPHPMSPA1S00 sku: SPHPMSPA1S00
  • Peristaltic pH Dosing Pump
  • Manufacturer: Seko
  • Code: SPHPMSPA1S00
  • Flow rate of 1,5 l/h at 1,5 bar
  • Proportional dosing mode to achieve the setpoint value
  • Allows communication with Modbus protocol
  • IP65 protection
  • Backlit display
  • Included:
    - pH electrode
    - probe holder
    - 2 collars
    - connection cable
    - buffer solutions
    - installation kit
€309.00 IVA included
Free shipping
Free Shipping + info

Technical characteristics

PH peristaltic pump Seko PoolMatch with Modbus

A peristaltic pump is a type of hydraulic pump used to pump a variety of fluids. The fluid is contained within a flexible tube inside a circular pump casing. A rotor with a number of rollers, shoes or wipers attached to the outer circumference compresses the tube. As the rotor turns, the part of the tube under compression closes forcing the pumped fluid to move through the tube. In addition as the tube is re-opened flow is induced into the pump, this process is known as peristalsis.

The pH is the parameter that measures the acidity or alkalinity of water. Alkaline water is water with a pH higher than 7.6 and acidic water is water with a pH lower than 7.2, the recommended values being between 7.2 and 7.6. Higher or lower values can reduce the effectiveness of chemical treatments.

The salt chlorinator automatically and effectively disinfects the pool water without the need for chemicals.
Benefits of salt chlorination. Only salt is needed. Avoids irritation. No more chemicals. Reduced maintenance.
  • Flow rate 1,5 l/h at 1,5 bar
  • Manufacturer: Seko
  • Code: SPHPMSPA1S00
  • Proportional dosing mode to achieve the setpoint value
  • Allows communication with Modbus protocol
  • IP65 protection
  • Backlit display
  • Including:
    - pH electrode
    - probe holder
    - 2 collars
    - connection cable
    - buffer solutions
    - installation kit
  • Equipment warranty: 3 years
    Incorrect placement of the pH probe will invalidate the warranty. The probe is a consumable not covered by the warranty, so it will be up to the manufacturer to determine in each case whether or not the warranty is applicable.

Data Sheet

Pump type
Peristaltic
Allows level control
Yes
Pump control
Digital
Automatic control of
pH

Documents

Verified Reviews

View the trust certificate
  • For further information on the nature of the review controls, as well as the possibility of contacting the author of the review please consult our CGU.
  • No inducements have been provided for these reviews
  • Reviews are published and kept for a period of five years
  • Reviews can not be modified: If a customer wishes to modify their review then they can do so by contacting Verified Reviews directly to remove the existing review and publish an amended one
  • The reasons for deletion of reviews are available here.

4 /5

Based on 1 customer reviews

  • 1
    0
  • 2
    0
  • 3
    0
  • 4
    1
  • 5
    0
Sort reviews by :

Roberto F. published the 11/07/2023 following an order made on 07/06/2023

4/5

Lleva dos semanas instalado y funciona correctamente. Lo único malo, es el manual, que no indica con precisión los pasos que hay que seguir para la programación, ni las posibilidades de conexión que tiene a la corriente eléctrica.

Did you find this helpful? Yes 1 No 0

×