Desincrustante líquido de filtros Netalifer CTX 57 en 5 litros

Liquid descaler Astralpool Filnet 5 litres

ref: 01LI08671 ean13: 8432611873957 sku: 73557
  • Filnet Filter Descaler Cleaner
  • Manufacturer: Astralpool
  • Code: 73557
  • Canister of 5 litres
  • Format: liquid
  • Powerful filter and sand descaler cleaner
  • Suitable for sand and glass filters
€24.90 IVA included
€9.90 of Shipping + info

Technical characteristics

Liquid descaler Astralpool Filnet 5 litres

A liquid product with acidic characteristics which removes incrustations produced by salts in the water and dirt deposited inside sand filters.

Liquid product that does not give off fumes that bother the user. Suitable for cleaning filters made of stainless steel or polyester. Does not generate foam. When dissolving limescale, effervescence is produced. Easy application and quick rinsing under running water.

DOSAGE and METHOD OF USE:

This treatment is only valid for stainless steel filters, whose filter load is flint or sand. With the filter stopped and uncovered, drain all the water from the bottom of the filter through the bottom valve. Close the drain valve and through the mouth of the filter introduce 2 litres of water followed by 2 litres of FILNET product for every 10 kgs. of sand or flint approximately. Of sand or flint approximately.

The level of the added solution must cover the level of sand, exceeding this by 20 to 30 cm. above it. Allow the product to react with the lime and dirt present in the filter. When the effervescence (bubbles) ceases, after a reasonable time (approximately 4 to 8 hours), close the filter cover and, placing the tap in the cleaning position, pass water through the filter to rinse it.

wARNING! The rinse water should be poured directly into the drain. Make sure that the pH of the waste water is equal to that of the inlet water during rinsing. At this point, the filter cleaning is finished. After inspecting the filter, repeat the treatment if caked or cemented sand remains.

Dose 2 Lts. of water followed by 2 Lts. of FILNET product for every 10 Kgs. of sand or flint approximately.

HAZARD IDENTIFICATION

Classification of the mixture.

According to Regulation (EU) No 1272/2008:

  • Eye Dam. 1 : Causes serious eye damage
  • Skin Corr. 1 : Causes severe skin burns and eye damage.

Label elements.

Labelling according to Regulation (EU) No 1272/2008:

Pictograms:

Warning word:

Danger

H-phrases:

  • H314 Causes severe skin burns and eye damage.

P-phrases:

  • P101 If medical advice is needed, have container or label at hand.
  • P102 Keep out of reach of children.
  • P280 Wear protective gloves/protective clothing/eye protection/face protection.
  • P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [o ducharse].
  • P305+P351+P338 IF IN EYES CONTACT: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
  • P501 Dispose of contents and/or container in accordance with hazardous waste regulations.

Contains:

  • Nitric acid [C > 70 %]
  • Phosphoric acid
  • Hydrochloric acid

Other hazards.

The mixture does not contain substances classified as PBT (Persistent, Bioaccumulative and Toxic).
The mixture does not contain substances classified as vPvB (very Persistent and very Bioaccumulative).
The mixture does not contain substances with endocrine disrupting properties.

Under normal conditions of use and in its original form, the product has no other adverse health and environmental effects.

Emergency telephone number:

Toxicological Information Service (National Institute of Toxicology and Forensic Sciences) Telephone: +34 91 5620420. Information in Spanish (24h/365 days). Only for the purpose of providing health response in case of emergency.