Spare Parts Pump Astralpool Victoria Plus

Not completely. The Victoria Plus range has three versions with different degrees of compatibility:

• Victoria Plus (base) and Sprint: share pump body and pre-filter.
• Victoria Plus Silent: has its own pump body (bulkier to reduce noise) but shares pre-filter and many external parts with the base Victoria Plus.
• Victoria Plus Silent VS (variable speed): shares body with the Silent, but the variable speed drive electronics is exclusive.

Parts that are common between the three versions: pre-filter basket, pre-filter cover, pre-filter O-ring, cover nut (in equivalent versions), linking accessories. Parts that are not common: pump body (Plus vs Silent), electronics (in VS).

It depends on the power: the 1.5 hp, 2 hp and 3 hp versions use the 16 microfarad capacitor. The 0.75 hp and 1 hp versions use the 12 microfarad capacitor. Astralpool and ESPA share a capacitor supplier, so it is the same electrical part as the sister ESPA models. Important: the physical appearance of the capacitor (printed mark, shape) may vary between batches because the supplier changes, but the electrical specification (16 mF or 12 mF) is always the same and is what matters for performance.

Yes, the pre-filter O-ring is common to all three versions of Victoria Plus (base, Silent, Silent VS) and is also compatible with other models Astralpool that share the same pre-filter: Sprint, Verdon, Glass Plus, Alaska Max, Alaska Plus. It is the part with the highest rotation: it gets crushed and deformed with time and by the repeated closing of the cap nut. Having a spare at home allows you to solve a priming loss in minutes in the middle of the season.

The pump motor label (on the side or back) shows the complete model:

• "Astralpool Victoria Plus" → base version.
• "Astralpool Victoria Plus Silent" → silent version.
• "Astralpool Victoria Plus Silent VS" → silent version with variable speed.

They are also visually distinguishable: the Silent and Silent VS are bulkier than the base Victoria Plus because of the silent system, and the Silent VS has an integrated electronic control panel for speed regulation (the other two are fixed speed). If the label is illegible, please send a photo to the technical team.

Yes, the Victoria Plus is one of the models with the most stable spare parts catalog of Astralpool, due to its large installation in residential pools at Espa. All the usual consumables (pre-filter basket, cover, O-ring, condenser) are available. For more specific internal parts (mechanical seal of older versions, diffuser), there may be updated references that replace the original ones; contact the technical team indicating model and power of the pump and the part you need to confirm availability.

Yes, they are accessible parts for home users:

• Pre-filter basket: trivial. No tools, seconds.
• Pre-filter cover and cover nut: trivial thanks to the new generation system without tools.
• Pre-filter O-ring: trivial. Open cover, replace, close.
• Cover + fan assembly: requires removal of rear motor cover with screws; 15-20 minutes.
• Capacitor (16 mF or 12 mF depending on power): requires opening the terminal box. CRITICAL: disconnect pump from power before handling. 10-15 minute operation if you have basic electrical experience. If not, call an electrician or service technician.
• Terminal box: requires disconnecting motor wiring; 30 minutes. Recommended intermediate level or electrician.
• Pump body and mechanical seal: NOT recommended for home user. Requires complete disassembly, precise seal alignment and reassembly with correct torque. Service.

Rule of thumb: if the sum of parts to be replaced + possible service exceeds 60-70% of the price of an equivalent new Victoria Plus, it usually pays more to buy new. Cases where it always pays to repair: replacement of condenser, O-ring, basket, cover (operations of 10-50 €). Borderline case: replacement of mechanical seal + possible pump body on a 10+ years old Victoria Plus, where the total can go to 250-350 €; here it depends on the general condition of the motor. Cases where it rarely pays off: motor breakdown (noisy bearings, damaged winding), where the cost is close to that of a new pump. Victoria Plus with a healthy motor are worth keeping: they are very solid constructions (stainless steel, technical plastics) and spare parts are still available.

Yes, the Victoria Plus is designed for use with salt chlorination in normal residential concentrations (3-6 g/l), and its construction with technical plastics and stainless steel is especially suitable for salt pools. Points to watch out for with salt: terminal box (moisture and salt in the air can corrode connections over time; keep closed and check screws every 2-3 years), power cable gland (keep tight to prevent moisture from entering). General maintenance: rinse the outside of the pump with fresh water at the end of the season to remove crystallized salt.

| Can't identify your part or need confirmation of compatibility? Tell us pump model and power (motor label). Contact us: https://www.quimipool.com/en/use-our-form-to-contact-us See also: Pumps Astralpool │ Spare parts pump Astralpool │ Spare parts pool pumps │ Technical service │ Spare parts │ Spare parts | | --- | |