Wybot E-Tron i30 NG W3342NG spare parts

The Wybot E-Tron i30 (model WY3342) represents the freedom of cordless cleaning, thanks to its lithium battery and smart navigation. With no floating cable, maintenance is focused on other critical elements such as the charger, charging port and filtration basket.

In this section you will find the necessary parts to ensure the performance of your equipment. As an autonomous robot, it is vital to use original Wybot spare parts to ensure that the watertightness (IPX8 protection) is not compromised and that battery charging is safe and efficient.

Features of Genuine Wybot Parts

Repairing your cordless robot with genuine parts is critical for three reasons:

• Charging Safety: Genuine Wybot chargers supply the exact voltage and amperage for the i30's lithium cells. A generic charger could irreversibly damage the battery or cause overheating.
• IPX8 watertightness: Elements such as the charging port cover or chassis gaskets are the barrier between water and electronics. Original spare parts ensure a perfect seal.
• Optimized Filtration: Original filter baskets are designed to maximize water flow, allowing the robot to maintain suction even when the battery starts to run low.

Buying Guide: Identify the Replacement Part for your E-Tron i30

We have categorized the replacement parts according to the specific needs of this cordless model:

1. Charging System and Battery

This is the "fuel" of the robot. If it fails, the equipment will not start.

• Charger / Power Adapter: If the charger LED does not light up or the robot does not charge after hours plugged in, it is usually necessary to replace the external adapter.
• Charging Port Plug: A small but vital part. If it is missing or the rubber is cracked, water will enter the charging contacts, oxidizing them (sulfation).

2. Filtration and Cleaning

• Filter Basket: The E-Tron i30 uses a large capacity basket. If the mesh breaks, dirt will back up into the pool.
• Brushes and Rollers: In charge of descaling the dirt before it is vacuumed. If they are worn, the robot may have difficulty climbing slippery walls.

3. Traction and Mobility

• Wheels / Tracks: [Pendiente de confirmar tipo exacto de tracción según versión WY3342] The system that allows the robot to move.
• Turbine Propeller: Located at the top outlet. If it becomes clogged with dirt, the robot will have no power to move or vacuum.

Professional Maintenance Tips (Cordless Robots)

Battery-powered robots like the Wybot E-Tron i30 require different care than corded robots:

• Charging Port ALWAYS Dry: Before connecting the charger, make 100% sure that the robot's charging port is completely dry. Moisture at this point causes galvanic corrosion and voids the warranty.
• Do Not Store Empty: Never store the robot over the winter with a fully discharged battery. Charge it to at least 50-80% before storing it to prevent the battery from going into "deep discharge" and dying.
• Immediate Filter Cleaning: Since there is no cord, power is dependent on the battery. A dirty filter forces the motor to consume more power, reducing the cleaning cycle time. Wash the basket after each use.
• Solar Protection: Do not leave the robot drying in direct sunlight in summer. Excessive heat degrades the lithium batteries and chassis plastics.

Troubleshooting Chart

what's wrong with your Wybot?